“Make Your Own Plywood Cat Tree”

“Make Your Own Plywood Cat Tree”

Make Your Own Plywood Cat Tree

Building your own plywood cat tree is a fun DIY project that will save you money compared to buying one pre-made. With just some basic tools and materials, you can create a customized cat tree that your furry friend will love.

Selecting the Materials

You’ll need the following supplies to make your plywood cat tree:

  • Plywood – This will form the base and platforms of the cat tree. 3/4 inch plywood is best as it’s sturdy but not too heavy.

  • Carpet – Cover the plywood surfaces with short-pile carpet to make it comfortable for kitty. Make sure it’s cat-friendly carpet without any loops or fibers they could get caught on.

  • DowelsWooden dowels in various diameters (e.g. 1/2 inch, 3/4 inch) will form the posts and supports.

  • Sisal rope – Wrap sisal rope around the posts and dowels to give cats something to scratch.

  • Screws – Use wood screws to assemble the cat tree. 2-3 inch screws work well.

  • Tools – You’ll need basic tools like a drill, sandpaper, screwdriver, saw, and tape measure.

Creating the Platforms

The platforms are the levels your cat will climb on and sleep on. Here’s how to make them:

  • Cut plywood into squares or circles using a saw. Round off the edges.
  • Sand the plywood so there are no rough edges.
  • Cover the surface with carpet using carpet glue or a staple gun. Wrap the carpet around the edges.
  • Place some dowels underneath for support. Secure with screws from below.
  • Make 2-3 platforms in graduated sizes. Bigger platforms on bottom, smaller higher up.

Building the Base

The base gives the cat tree stability and raises the lowest platform off the floor:

  • Cut 1-2 pieces of plywood for the base. A square 16 x 16 inch or circular 16 inch base works well.
  • Glue and screw dowels along the edges to attach the first platform. Make sure the dowels extend several inches above the base.
  • Place the largest platform on top of the base dowels. Screw from below to secure.

Adding Posts and Perches

Posts and perches give cats places to perch, scratch, and climb:

  • Cut wooden dowels into tall posts to support higher platforms. Cover with sisal rope for scratching.
  • Attach shorter dowel rods horizontally between platforms for perching/climbing. Wrap these with sisal rope too.
  • Place a dowel post at each platform corner. Use screws to attach posts to base and platform edges.

Finishing Touches

Some final touches to complete your cat tree:

  • Make sure all screw heads are recessed into the wood and covered with carpet.
  • Consider adding some dangling toys or a hammock for extra fun.
  • Spray with catnip! Cats love cat trees even more when infused with their favorite herb.

With some carpentry skills and patience, you can build an amazing plywood cat tree customized exactly how your cat likes it. Just be sure to make it sturdy, since larger cats can put a lot of force on it while playing. Your cat will thank you with hours of entertainment!