How to Repurpose Old Tires into Affordable House Siding

How to Repurpose Old Tires into Affordable House Siding

How to Repurpose Old Tires into Affordable House Siding

Why Repurpose Tires into Siding?

Tires are notoriously difficult to recycle. Once worn out, most tires end up in landfills where they take up space and release harmful chemicals as they degrade slowly. Repurposing old tires into house siding is an innovative way to reuse tires that would otherwise go to waste. As a siding material, tires provide excellent insulation, durability, and an affordable alternative to traditional siding. Here are some of the key benefits of using repurposed tires for house siding:

  • Insulation: The thick rubber of tires is an excellent insulator. Tire siding can help regulate indoor temperatures and lower energy bills.

  • Durability: Tire rubber is resistant to weather, rot, pests, and fire. Properly installed tire siding can last for decades.

  • Affordability: Old tires are free or very cheap. Turning them into siding is an inexpensive way to re-side a home compared to materials like wood, vinyl, or brick.

  • Sustainability: Repurposing old tires reduces waste and the need to manufacture new siding materials. It’s an eco-friendly building solution.

With some creativity and labor, tires can be given new life as a stylish, functional, and eco-friendly form of home siding.

How to Make Tire Siding

Creating siding from old tires is a fairly straightforward DIY project. Here are the basic steps:

  • Obtain tires. Source discarded tires for free or cheap from tire shops, junkyards, craigslist, or neighbors. Look for thick, heavy truck tires without sidewall damage.

  • Clean the tires. Remove any debris, dirt, or loose rubber with a wire brush. Wash tires with soap and water.

  • Cut the tires. Using a reciprocating saw with a sharp blade, cut the tires into straight sections 12-18 inches wide. Wear protective gear.

  • Drill holes. Drill 1-2 holes near the edges of each tire section to allow nailing or screwing to the house later.

  • Prepare the wall. Remove old siding if present. Install furring strips if needed to create a flat surface.

  • Install tire sections. Nail or screw tire sections to the wall overlapping like shingles. Use exterior-grade screws. Leave 1-2 inches between sections for drainage.

  • Seal and finish. Apply adhesives or caulking between tire sections. Paint or stain as desired to protect and beautify the siding.

With some basic DIY skills and tools, these steps can transform old tires into long-lasting, curb-appealing siding for your home. Tire siding provides the look of stone or stucco for a fraction of the cost.

Design and Installation Considerations

When using old tires for home siding, keep these tips in mind:

  • Pattern the tire sections into pleasing designs. Alternate direction or color for visual interest.

  • Use thick, heavy tires for durability. Truck, equipment, and tractor tires work best. Avoid thin passenger tires.

  • Allow for ventilation and drainage between tire sections to prevent moisture issues.

  • Use galvanized, exterior-grade screws to strongly attach tire sections to the wall. Nails are prone to loosening over time.

  • Apply adhesives or caulk thoroughly between tire sections to prevent air or water infiltration. Use quality exterior-grade products.

  • Consider permeable or rubber paints designed for tires to finish the siding. They allow the rubber to flex and breathe.

  • Hire a professional if you lack DIY skills, time, or manpower for large siding projects. Their expertise can save you hassles.

With good planning, materials, and installation, tire siding can provide exceptional performance and curb appeal for years to come. It’s a budget-friendly way to give your home a fresh new look while repurposing hard-to-recycle tires.